The DEMU reinforcing bar coupler 2005 is a simple system for joining reinforcing bars with a diameter of 10 - 40 mm. The coupler is suitable for connecting reinforcing steel, where it is not possible to have continuous bars (for  example when the fixed bar is already in place and there is insufficient space for hydraulic swaging press). The reinforcing bar coupler 2005 is easy to install: simple, quick and safely. When tightening the lockshear bolts, the bolts will shear. The bar ends are supported within the coupler by two  serraded saddles, and as the lockshearbolts are tightened, the conical ends embed themselves into the bar. As this happens the serrated saddles bite into both the bar and the shell of the coupler. The reinforcing bar coupler 2005 is suitable for all kinds of reinforcing steel.

More information about the reinforcing bar couplers can be found in the rebar coupler documentation

2005-ETS is suitable for connecting bars of the same bar diameter.

2005-ETT s suitable for connecting bars with different bar diameter.

          2005-ETT can be used at the edge.